Sprinkler Head Not Popping Up: Quick Fixes
Sprinkler Head Not Popping Up: Quick Fixes
Blog Article
When a sprinkler head won’t pop up, start with these quick fixes:
- **Check water flow:** Ensure the valve is open and the zone is activated.
- **Clear debris:** Remove the head, clean the riser tube, and flush the line.
- **Test pressure:** Use a pressure gauge—minimum 25 PSI is needed.
- **Inspect the spring:** If the riser won’t retract or extend, the spring may be broken—replace it.
- **Lubricate moving parts:** Apply silicone spray to the riser to ease movement.
- **Adjust burial depth:** If the head is too deep, install a riser extension (e.g., Kap-It) to raise it.
- **Check for damage:** Cracked bodies or nozzles may need replacement.
These steps resolve most popping issues without professional help.
Report this page